Description
Included Parts: - 380C Pewter Air Compressor - Thermal Overload Protector - 2 Gallon Air Tank - Pressure Switch (165 PSI On / 200 PSI Off) - Safety Valve (250 PSI) - Drain Cock - Leader Hose with Check Valve Specifications: 12-Volt Permanent Magnetic Motor Duty Cycle: 100% @ 100 PSI (55% @ 200 PSI) Max. Working Pressure: 200 PSI Ingress Protection Rating: IP67 Max. Amp Draw: 23 Amps Net Weight: 21.05 lbs. Air Tank Temperature Rating: -40°C ~ +80°C Air Tank Temperature Rating: -40°F ~ +176°F Fast-Fill 200 PSI Air Source Kits come with a powerful, low amp-draw 380C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry’s leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8″ (I.D.) air line pre-installed! To use, simply connect the pressure switch to fused power, make a solid ground, and connect an air line to the compression fitting. A 40-amp relay and an appropriately-rated fuse is recommended for use with this unit. Fill Rates 2.0 Gallon Tank Fill Rate 0 To 200 PSI 5 Min 39 Sec. 165 To 200 PSI 1 Min 29 Sec.