-40%
Viair 380C PEWTER Dual Air Compressors w 8 ASCO 1/2" NPT 12V DC Valves, Bags
Viair 380C PEWTER Dual Air Compressors w 8 ASCO 1/2" NPT 12V DC Valves, Bags
Viair 380C PEWTER Dual Air Compressors w 8 ASCO 1/2" NPT 12V DC Valves, Bags

Viair 380C PEWTER Dual Air Compressors w 8 ASCO 1/2" NPT 12V DC Valves, Bags

$ 398.33

  • Brand: VIAIR
  • Country/Region of Manufacture: United States
  • Kit or Single Part: Kit
  • Manufacturer Part Number: 38002 +SC8238T405
  • Part Brand: ASCO,ASCO
  • Performance Part: Yes
  • Placement on Vehicle: Left, Right, Front, Rear, Upper, Lower
  • Surface Finish: Brass,Black
  • UPC: Does Not Apply
  • Warranty: 1 Year
  • gtin13: Does Not Apply

Description

Newmatics Inc.1832 Lone Star Rd, Mansfield, TX 76063 We offer combined shipping on all orders Parts Sold For OFF Road / Show USE Only PLEASE READ THE ENTIRE LISTING AND SHIPPING TERMS BEFORE BUYING Brand New Viair 380C "Pewter" 200 PSI Max Dual Pack with 8 ASCO 1/2" 12V DC 230 PSI Max Fast Electric Valves. Viair & ASCO are most trusted names when it comes down to Air Ride Suspension for your show class or daily driver Trucks & Cars. These valves will be able to lift heavy duty trucks and cars without any hassle. NOTE: Read the entire listing along with shipping and handling method specified at bottom of this listing. The VIAIR 380C Dual Performance Value Pack is ideal for air suspension systems capable of providing a maximum of 200 PSI and a 100% duty cycle. The kit features two 12-volt Pewter, Chrome, or Stealth Black 380C air compressors, two heavy duty 40-amp relays and a 165 PSI cut-on, 200 PSI cut-off heavy-duty pressure switch. Each 380C Dual Performance Value Pack also comes with remote mountable air filter assemblies and mounting hardware. Note: Use thread sealant for proper installation. Teflon tape is not recommended. Properly sealed, recommended torque is 12 to 15 ft. lbs. WARNING : This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Specifications: 12V DC Permanent Magnetic Motor Duty Cycle: 100% AT 100 PSI (55% AT 200 PSI) Max. Working Pressure: 200 PSI Max. Air Tank : 10 Gallon Max. 12V AMP Draw: 44 AMP Per Compressor Ingress Protection Rating : IP67 Items Included: 2 Viair 380C "Pewter" Compressors & 8 1/2" NPT 12V DC Normally Closed Valves. All Compressor Mount Hardware Spare Filters (2) Sets of 40 AMP Relays (1) Heavy Duty 12V 20 AMP Pressure Switch (165 PSI ON, 200 PSI OFF) (Actual cutoff may vary at 200 PSI max. as all pressure switch are 5% Plus Minus Max. Pressure Rating. (2) Stainless Steel Braided Hoses (21" L) with inline check valve at end Fill Rates: 2.5 Gallon Tank Fill Rate 0 to 200 PSI 3 min. 13 sec. (± 10 sec.) 165 to 200 PSI 53 sec. (± 05 sec.) 5.0 Gallon Tank Fill Rate 0 to 200 PSI 7 min. 11 sec. (± 15 sec.) 165 to 200 PSI 2 min. 06 sec. (± 10 sec.) Useful Tips: Always wire pressure switch from ignition source, do not wire it directly from battery as it will stay hot all time. any leakage in bags, valves or fittings will make compressor run even if the vehicle not running. It will damage compressors in long run. Use proper gauge wire when wiring the compressors, do not use 12AWG wire similar to the end wire leads on compressors. This will cause wires to heat up with AMP draw (44 AMP, for dual compressors) and eventually wires will melt and compressor will be damaged. Do not use more than 10 Gallon tank with these compressors, ideal tank size for these compressors is 5 Gallon. Do not ground valves, amplifiers or any other devices at same spot where compressor or relays are grounded, this may cause more AMP draw then what system can handle. Use 80 AMP relay if possible with these compressors. Do not over tighten leader hose in to the tank port as it may result in to low air flow or no air flow from compressor to tank. It may also damage the inline check valve on leader hoses resulting in back flow of air pressure inside the tank. Use specified torque when tightening leader hoses. ASCO Valves: 12V DC Normally Closed 2 way pilot operated valves with 300 PSI Max. Comes with Air Flow arrow at the bottom of valve body Just use two small prongs when wiring these valves, does not matter what prong is power and what is ground, do not use middle large prong. Always use thread sealant when connecting valves with fittings. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov . Shipping: FREE Shipping Via UPS in the lower 48 States in USA. NO PO Box only to physical addresses in 48 states in USA. Other Expedited Shipping methods are available for this item. International Shipping Via USPS Priority Mail International and USPS Express Mail International only. Please note we may ship this item via FedEx to certain countries based on destination country location as well total number of items purchased together.